Posts Tagged ‘shoreline’

Lite Series

SandShark Lite Series Anchors

The new "Lite Series" of anchors provide strength and quality at an affordable price!  Offered in a variety of sizes to meet all of your anchoring needs. All 5/8" SandShark Lite Series anchors are recommended for all boats and watercraft less than 30' depending on conditions.  Different lengths are offered to accommodate anchoring in deeper water. These anchors are 100% stainless steel, with a lifetime warranty, and a 30-day money back guarantee! Insert our universal handle for all Lite Series Anchors and easily turn the anchor into the beach, shoreline, or shallow water water. No more worrying about your watercraft getting damaged, smashed, or being "taken out" with the tide.  Works in almost all sandy, soft, or rocky conditions.  Use with your Boat, Jet Ski, PWC, Pontoon, Tritoon, or any type of watercraft!

How to Use the SandShark Lite 36 Boat Sand & Shallow Water!

  Lite Series Anchors:Recommended Uses: * Boat, Pontoon, Tritoon * Jet Ski, PWC, Waverunner * Dinghy's, Power-House Boat * Short/Long Term Dock Post * Ground Stake, Kite Anchor * Beach, Sand, Shore Spike * Water Trampoline Stake

Click Here To Get Yours Today!

Related Images:

The Best Jet-Ski, PWC, Waverunner Sand Anchor

I went looking for the best sand anchor for jet ski's, PWC's, and waverunners and found that there really isn't a lot of very good options.  With the size and weight of new personal watercraft you want an anchor that is strong and compact.  Most of the ones I found were small and ineffective.  Given the need for this type of product, we at SandShark Products wanted to design an anchor specifically for personal watercraft.  It needed to work in windy, choppy conditions and not allow the tide to drag the waverunner out to sea.  We talked with customers and did rigorous testing, and used the highest quality material to come up with the best product.  Although it may cost a little more you will find that it is money well spent for the piece of mind of protecting your investment.

This is how we came up with the idea for the SandShark JR.  It is by far the best sand anchor for your jet ski, PWC, and waverunner.  If you compare it to other products you will find the JR is unmatched in its performance, quality, and durability.  With 31" of 1/2 round stainless steel, a storage feature that allows it to fit in the front compartment of your jet ski or PWC I think you will agree that you will not find a better anchoring choice for your watercraft.  With a lifetime warranty and money back guarantee how can you go wrong!

Related Images:

New Boat, Jet Ski, and PWC sand auger anchors

Coming soon are our "lite" series of sand auger anchors for boats, jet skis, and PWC's.  This is a new and economical design made completely of stainless steel.  These will still be one of the best and most effective anchoring solutions on the market.  They will be offered in 4 different sizes ranging from 18"-48" for easy shallow water anchoring.  If you are in a couple feet of water, setting these anchors will be a breeze!

Better yet, the prices start out at $39!

We should have them available on the website around the first of April.

Thank You!

SandShark Products

Related Images:

Use more than one SandShark for boats over 30′

I went to the local marina today to drop off a few Sand Shark Anchors for the upcoming sale. The guys there were busy surprisingly, lots of boaters in getting service work done, mostly houseboats. One of the customers saw me struggling to carry them in and helped me out thankfully. I handed him 3 of them... he kinda grunted and gave me a look, that's about 50 pounds of steel.

We started talking and he was pretty curious, he liked the idea and design, but thought the auger blades were kind of small. He asked if I thought the anchor would hold his 40 foot houseboat on mostly a sandy bottom, off an island on the lake with a small little beach for docking. He mentioned it's a pain every time they go out, and needs to constantly watching his pvc spikes and anchor lines tied on shore to make sure they don't get pulled out. I told him two Sand Shark Anchors would hold his boat in place with no trouble, usually I recommend 1 Anchor for a 30ft boat and 1 extra anchor for every 15ft of boat after that. A lot depends on the water conditions too, but in his case it wasn't an issue.

We went out to the docking ramp near some shallow water and I let him auger one down into the clay and and sand bottom near the water on the shoreline. He flipped out the handles and cranked it down to about a foot and half pretty easily. I told him to stop there and try to pull it out. He gave it a couple big tugs, then laughed saying, "Well I doubted the auger blade size, but I probably should have known better... you seem to be selling quite a few of these and they're heavy duty. I've seen these around and never imagined they were this solid." I told him that he wasn't the first to doubt it, most people look shocked when they first hold one, commenting on the weight. I'm always more than happy in letting people try out the Sand Shark for the first time and auger it down, then try to pull it out, gets them every time!

On the Beach of Lake MichiganStainless Steel AugerStainless Steel Auger Shaft

Related Images:

SandShark Anchor

SandShark Ultimate sand anchor pole

The Ultimate Stainless Steel Portable Auger Anchoring System for Shore and Shallow Water Docking

Features and Specifications:

  • Easily Extends, 5'ft. or 62.5" inches Fully Extended
  • Lifetime Warranty, Top Quality and Built to Last
  • Quality Built and Solid Construction, Weighs 12.2 lbs
  • 1" inches Solid Stainless Steel Auger Shaft w/4'' Blade
  • 1.5" inches Anodized Aluminum Housing Tube
  • Stainless Steel Collapsible Handle Crank
  • Handle Crank Wingspan Fully Extended 16" inches, Collapsed 4" inches
  • Stainless Steel Handle Insert, Rope Eyelet, Screws, and Pins
  • Portable, only 39" inches Completely Folded and Collapsed
  • Constructed using Stainless Steel w/Anodized Aluminum Housing
  • Tie-Off on the shore, land, beach, gravel, or shallow water
  • High Corrosion Resistance

SandShark Anchor Prices and Order Online!

Lifetime Warranty Information

If anything goes wrong, relax! Just ship us the broken or worn out part and upon receipt we will ship out a replacement within 24 hours. Lifetime guarantee applies to mechanical workings and structural integrity of the SandShark when used as recommended under normal conditions. Non-U.S. customers are responsible for all shipping charges.
30 day 100% money back guarantee
30 day 100% money back guarantee. We know we've made a lot of claims and we stand behind them all!  What better way to back them up than give you 30 days to look at the SandShark and see how it compares. If you find that we fall short on performance, craftsmanship or quality, send it back. Upon receipt you will be given a full refund for the purchase price of the SandShark Anchor product. No returns will be accepted without a return authorization number. You can call or email SandShark Products to obtain your RA#. All returns must be packaged carefully as when received and returned in the original box. The returned item(s) must be insured for the purchase value of the contents. All shipping cost associated with the return is at the responsibility of the customer. All items must be returned in resell-able condition to receive a full purchase price refund.

Related Images:

New Anchors for 2017: XL, Large & PWC > Learn more…

Shop SandShark Anchors & Products 24/7 :: Buy Online, Fast Shipping!

Visit the Sand Shark Anchor Products: Shopping Site