Posts Tagged ‘secure’

How to use your SandShark Anchor

To position the SandShark:

  1. Remove from case and extend to desired length.
  2. Hand- tighten the center knob clockwise.*
  3. Rotate handles 180 degrees.  Extend the handles so that you can apply downward pressure without the  handles folding down.
  4. Pick a spot 2-5' away from boat.  Auger clockwise into the ground until a firm base is established.  This may take several revolutions.  Auger to a depth where a firm base is established (Approximately 1-3').
  5. After auger obtains a firm base, extend or lower the anchor using the center knob and re-tighten.  The optimum position is to have the handles at or above water level,  if this is not possible fully extend to maximum length.*
  6. Secure to boat and enjoy your time worry-free!  The SandShark will keep the waves from beaching your boat!


To remove the SandShark:


  1. Release the anchor from the boat.
  2. Fold the handles upwards, rotate handles 180 degrees, then fold upwards so you can apply upward pressure to the SandShark.
  3. Turn the handles counter-clockwise while applying upward pressure. This may take several revolutions.
  4. After the auger is released from the bottom, rinse away any excess sand and grit.
  5. Rotate handles 180 degrees, then fold down
  6. Loosen center knob, collapse the anchor, and re-tighten the center knob*
  7. Place in desired storage location.


*please note -- Always re-tighten the center knob.

*please noteThe SandShark will work even if completely submerged in the water.



FOR BEST RESULTS:

Attach one SandShark to the front of the boat and one SandShark at the rear of the to prevent side-to-side swaying.

Related Images:

SandShark Anchor

SandShark Ultimate sand anchor pole

The Ultimate Stainless Steel Portable Auger Anchoring System for Shore and Shallow Water Docking

Features and Specifications:

  • Easily Extends, 5'ft. or 62.5" inches Fully Extended
  • Lifetime Warranty, Top Quality and Built to Last
  • Quality Built and Solid Construction, Weighs 12.2 lbs
  • 1" inches Solid Stainless Steel Auger Shaft w/4'' Blade
  • 1.5" inches Anodized Aluminum Housing Tube
  • Stainless Steel Collapsible Handle Crank
  • Handle Crank Wingspan Fully Extended 16" inches, Collapsed 4" inches
  • Stainless Steel Handle Insert, Rope Eyelet, Screws, and Pins
  • Portable, only 39" inches Completely Folded and Collapsed
  • Constructed using Stainless Steel w/Anodized Aluminum Housing
  • Tie-Off on the shore, land, beach, gravel, or shallow water
  • High Corrosion Resistance

SandShark Anchor Prices and Order Online!

Lifetime Warranty Information

If anything goes wrong, relax! Just ship us the broken or worn out part and upon receipt we will ship out a replacement within 24 hours. Lifetime guarantee applies to mechanical workings and structural integrity of the SandShark when used as recommended under normal conditions. Non-U.S. customers are responsible for all shipping charges.
30 day 100% money back guarantee
30 day 100% money back guarantee. We know we've made a lot of claims and we stand behind them all!  What better way to back them up than give you 30 days to look at the SandShark and see how it compares. If you find that we fall short on performance, craftsmanship or quality, send it back. Upon receipt you will be given a full refund for the purchase price of the SandShark Anchor product. No returns will be accepted without a return authorization number. You can call or email SandShark Products to obtain your RA#. All returns must be packaged carefully as when received and returned in the original box. The returned item(s) must be insured for the purchase value of the contents. All shipping cost associated with the return is at the responsibility of the customer. All items must be returned in resell-able condition to receive a full purchase price refund.

Related Images:

New Anchors for 2017: XL, Large & PWC > Learn more…

Shop SandShark Anchors & Products 24/7 :: Buy Online, Fast Shipping!

Visit the Sand Shark Anchor Products: Shopping Site