Connect with Us!

SandShark Anchor Facebook Youtube Channel SandShark Anchor RSS feed

Testimonials

Amazing Product this is well constructed and quality that is built for many years of use. It took me less than 2 minutes to set and and forget it no problem at all holding my jet ski and keeping it off the sand bar. This is well constructed and something that will pay for it self by the prevention of hull damage from the beach and other skis and boats. Held my Seadoo(3 person) in place in 1.5 ft waves amazing. Everyone else's anchors kept getting jerked loose and they kept having to readjust and I just relaxed and enjoyed myself :).

Gerald

... show more

Posts Tagged ‘sandshark’

Lite Series

SandShark Lite Series Anchors

The new "Lite Series" of anchors provide strength and quality at an affordable price!  Offered in a variety of sizes to meet all of your anchoring needs. All 5/8" SandShark Lite Series anchors are recommended for all boats and watercraft less than 30' depending on conditions.  Different lengths are offered to accommodate anchoring in deeper water. These anchors are 100% stainless steel, with a lifetime warranty, and a 30-day money back guarantee! Insert our universal handle for all Lite Series Anchors and easily turn the anchor into the beach, shoreline, or shallow water water. No more worrying about your watercraft getting damaged, smashed, or being "taken out" with the tide.  Works in almost all sandy, soft, or rocky conditions.  Use with your Boat, Jet Ski, PWC, Pontoon, Tritoon, or any type of watercraft!

How to Use the SandShark Lite 36 Boat Sand & Shallow Water!

  Lite Series Anchors:Recommended Uses: * Boat, Pontoon, Tritoon * Jet Ski, PWC, Waverunner * Dinghy's, Power-House Boat * Short/Long Term Dock Post * Ground Stake, Kite Anchor * Beach, Sand, Shore Spike * Water Trampoline Stake

Click Here To Get Yours Today!

Related Images:

The Best Jet-Ski, PWC, Waverunner Sand Anchor

I went looking for the best sand anchor for jet ski's, PWC's, and waverunners and found that there really isn't a lot of very good options.  With the size and weight of new personal watercraft you want an anchor that is strong and compact.  Most of the ones I found were small and ineffective.  Given the need for this type of product, we at SandShark Products wanted to design an anchor specifically for personal watercraft.  It needed to work in windy, choppy conditions and not allow the tide to drag the waverunner out to sea.  We talked with customers and did rigorous testing, and used the highest quality material to come up with the best product.  Although it may cost a little more you will find that it is money well spent for the piece of mind of protecting your investment.

This is how we came up with the idea for the SandShark JR.  It is by far the best sand anchor for your jet ski, PWC, and waverunner.  If you compare it to other products you will find the JR is unmatched in its performance, quality, and durability.  With 31" of 1/2 round stainless steel, a storage feature that allows it to fit in the front compartment of your jet ski or PWC I think you will agree that you will not find a better anchoring choice for your watercraft.  With a lifetime warranty and money back guarantee how can you go wrong!

Related Images:

New Boat, Jet Ski, and PWC sand auger anchors

Coming soon are our "lite" series of sand auger anchors for boats, jet skis, and PWC's.  This is a new and economical design made completely of stainless steel.  These will still be one of the best and most effective anchoring solutions on the market.  They will be offered in 4 different sizes ranging from 18"-48" for easy shallow water anchoring.  If you are in a couple feet of water, setting these anchors will be a breeze!

Better yet, the prices start out at $39!

We should have them available on the website around the first of April.

Thank You!

SandShark Products

Related Images:

How to anchor your boat, jet ski, waverunner, or PWC in sand or shallow water next to the beach.

Many coastlines of the Great Lakes and Oceans do not allow you to go past the wet sand of private beaches.  In order to enjoy these great locations on your boat, jet ski, waverunner, or PWC you need to anchor out in the sand or shallow water.  The SandShark and SandShark JR gives you the best option to securely anchor at these great locations.  With extension features and the unmatched strength of our anchors, you can easily reach deep into the bottom for a great "bite" to obtain the most secure holding power so that your watercraft won't be damaged.  If you travel the coastlines of the Oceans or Great Lakes you now can enjoy every inch of these shorelines.  Try the best sand and shallow water anchor by SandShark Products today!

Related Images:

Beat the High Gas Prices!

Beat the high gas prices on the lake this summer.  Get a SandShark shallow water sand anchor and park your boat at the sandbar.  This way you don't have to worry about your boat drifting away and you won't have to watch your life savings evaporate in the fuel tank!

Related Images:

Use more than one SandShark for boats over 30′

I went to the local marina today to drop off a few Sand Shark Anchors for the upcoming sale. The guys there were busy surprisingly, lots of boaters in getting service work done, mostly houseboats. One of the customers saw me struggling to carry them in and helped me out thankfully. I handed him 3 of them... he kinda grunted and gave me a look, that's about 50 pounds of steel.

We started talking and he was pretty curious, he liked the idea and design, but thought the auger blades were kind of small. He asked if I thought the anchor would hold his 40 foot houseboat on mostly a sandy bottom, off an island on the lake with a small little beach for docking. He mentioned it's a pain every time they go out, and needs to constantly watching his pvc spikes and anchor lines tied on shore to make sure they don't get pulled out. I told him two Sand Shark Anchors would hold his boat in place with no trouble, usually I recommend 1 Anchor for a 30ft boat and 1 extra anchor for every 15ft of boat after that. A lot depends on the water conditions too, but in his case it wasn't an issue.

We went out to the docking ramp near some shallow water and I let him auger one down into the clay and and sand bottom near the water on the shoreline. He flipped out the handles and cranked it down to about a foot and half pretty easily. I told him to stop there and try to pull it out. He gave it a couple big tugs, then laughed saying, "Well I doubted the auger blade size, but I probably should have known better... you seem to be selling quite a few of these and they're heavy duty. I've seen these around and never imagined they were this solid." I told him that he wasn't the first to doubt it, most people look shocked when they first hold one, commenting on the weight. I'm always more than happy in letting people try out the Sand Shark for the first time and auger it down, then try to pull it out, gets them every time!

On the Beach of Lake MichiganStainless Steel AugerStainless Steel Auger Shaft

Related Images:

How the handles work on the SandShark anchor.

One of the key features of the SandShark anchor is the folding handles.  They are one of a kind and make the SandShark portable and compact.  To see how they work, click the video link below and watch the short video which shows how they work.

Click Here to watch the Folding Handles Video

Related Images:

How to keep your anchors from being pulled-out.

Put an auger anchor just into the water.  Not on the dry shore, but far enough in the water to keep the bottom of the auger covered with water.  With beach spikes in the sand, there is not a natural way to keep sand packed around the shaft, plus there is no "pull-out prevention" like an auger blade.  When an auger anchor is in the water, the water will keep the sand packed around the shaft and blade, this keeps the anchor firmly in place.

The water weight applies downward pressure onto the sand.  This creates an air tight suction which also keeps the anchor in place.  You will find that with the SandShark Anchor, you will not be pulling them out.  You will have to "unscrew" it out of the sand.  With the SandShark you have a 1" solid shaft with a 4" blade planted into the bottom.  Your kids won't be pulling that out!

Related Images:

Why SandShark?

If You're Tired Of Holding Your Boat In Place, Try Our Sand Anchors Risk Free!
  • Your Boat Or Jet Ski Will Not Drift With The SandShark Anchor!
  • This is the product you've been waiting for, get the strongest, most effective portable anchoring system for your boat.
  • Our sand anchors solve the most common boat anchoring problem, "Drifting".
  • With this anchoring system your boat will not drift, and will keep "You" from having to hold your boat in place!
  • So go spend more time with your family and friends on the water and start having some fun again!
Dont' Hold Your Boat in Place... Go have some fun! You are probably tired of standing next to the boat while your friends are having a good time. Don't miss out on anymore good times with this sand anchoring system. Dock your boat or jet-ski in loose or hard bottoms. You can use them in sand or rocky bottoms. Our sand anchors cut through and hold in almost any condition. You won't worry if you have heavy winds and waves, your sand anchors will hold. Don't worry about the tide taking your watercraft out to sea or left beached on the shore, use the SandShark for a temporary dock or use as a portable boat dock. Your boat can out of sight without worries!
  “This is the strongest boating anchor I have seen!  I have never seen a product like it.  It blows away everything else on the market!” -Roland Michaels  
Use it with your...
  • boat
  • pontoon
  • tritoon
  • jet ski
  • power boat
  • dinghy
  • yacht
  • fishing boat

Great features, easy to use, easy to store

No other sand anchors offer the strength and compatibility like our products. They are made to extend almost double their size and collapse for easy storage with the boat and jet ski versions. With our sharpened stainless steel auger, the anchor turns easily into the bottom. Convenient folding and collapsing features stow easily in your watercraft. No more “long anchor line” congestion at the sandbar. Our anchors set within a few feet. Once the anchor is set in place, it is as simple as looping a dock line from the anchor to the boat.

Lifetime Warranty

We are so confident in our products that you receive a lifetime warranty. If you have any problems with your anchoring system we will replace the defective parts or anchor if necessary. Think about being able to dock your boat for hours or days and not worrying about the conditions getting too rough. You will keep boat or jet-ski from expensive prop and hull damage. Our products are designed well and are made from the best materials available, plus you'll have the "coolest anchor at the beach" If you don't think our anchor does what is says, send it back with our 30 day satisfaction guarantee.

Try it risk free

Your anchor will last a lifetime.  It would be foolish to offer such long guarantees and warranties if we did not believe in our products. If it doesn't work as good as we claim, box it up and we will pay the return shipping! You have nothing to lose! How much would you spend for an anchor "that actually works" and lasts a lifetime? How much for the best materials and features offered on a shallow water anchoring system?   "SandShark Anchor only $199"   A reasonable price for an anchor that works! This is probably more than you spend on other anchors, but you wouldn't be reading this today if they had worked. This is less expensive than boat repair or replacing a quality prop. You can protect your investment with a quality anchoring system. If you buy an anchor we ship it within 24 hours. It will be shipped via UPS ground delivery. If you pay for it, we send it promptly! Check the UPS time in transit from zip code 46563 to your location.

Never buy another anchor for shallow water!

"30 day 100% Money Back Guarantee" We realize it is hard to test an anchor on a website. You need to be totally convinced you've made the best choice for you. So we've made it even easier for you. Now you can try a SandShark Anchor for your boat for a full 30 days at no risk. Yes for a FULL 30 days you can...
  • Inspect
  • Test
  • Try-Out
In fact...you can use the SandShark Anchor in any way you would like for a full 30 days, a No-Risk Guarantee! And if after that time you're not totally convinced it's for you...
  • Return it!
  • We Pay Return Shipping
  • It costs you nothing
  • No worries about making the wrong decision.
  • Could you make a wrong decision?
NO...there could not be an easier way to protect your investment and keep it safe at the beach or sandbar.  So, spend more time with your family and friends, and do not worry! Now is your chance to try the best boat anchoring system Risk Free for 30 Days. Click Here To Get Your SandShark Today!  

Related Images:

How to use your SandShark Anchor

To position the SandShark:

  1. Remove from case and extend to desired length.
  2. Hand- tighten the center knob clockwise.*
  3. Rotate handles 180 degrees.  Extend the handles so that you can apply downward pressure without the  handles folding down.
  4. Pick a spot 2-5' away from boat.  Auger clockwise into the ground until a firm base is established.  This may take several revolutions.  Auger to a depth where a firm base is established (Approximately 1-3').
  5. After auger obtains a firm base, extend or lower the anchor using the center knob and re-tighten.  The optimum position is to have the handles at or above water level,  if this is not possible fully extend to maximum length.*
  6. Secure to boat and enjoy your time worry-free!  The SandShark will keep the waves from beaching your boat!


To remove the SandShark:


  1. Release the anchor from the boat.
  2. Fold the handles upwards, rotate handles 180 degrees, then fold upwards so you can apply upward pressure to the SandShark.
  3. Turn the handles counter-clockwise while applying upward pressure. This may take several revolutions.
  4. After the auger is released from the bottom, rinse away any excess sand and grit.
  5. Rotate handles 180 degrees, then fold down
  6. Loosen center knob, collapse the anchor, and re-tighten the center knob*
  7. Place in desired storage location.


*please note -- Always re-tighten the center knob.

*please noteThe SandShark will work even if completely submerged in the water.



FOR BEST RESULTS:

Attach one SandShark to the front of the boat and one SandShark at the rear of the to prevent side-to-side swaying.

Related Images:

New Anchors for 2017: XL, Large & PWC > Learn more…

Shop SandShark Anchors & Products 24/7 :: Buy Online, Fast Shipping!

Visit the Sand Shark Anchor Products: Shopping Site