Posts Tagged ‘sand spike’
The Best Jet-Ski, PWC, Waverunner Sand Anchor
April 5, 2011 | 
Author I went looking for the best sand anchor for jet ski’s, PWC’s, and waverunners and found that there really isn’t a lot of very good options. With the size and weight of new personal watercraft you want an anchor that is strong and compact. Most of the ones I found were small and ineffective. Given the need for this type of product, we at SandShark Products wanted to design an anchor specifically for personal watercraft. It needed to work in windy, choppy conditions and not allow the tide to drag the waverunner out to sea. We talked with customers and did rigorous testing, and used the highest quality material to come up with the best product. Although it may cost a little more you will find that it is money well spent for the piece of mind of protecting your investment.
This is how we came up with the idea for the SandShark JR. It is by far the best sand anchor for your jet ski, PWC, and waverunner. If you compare it to other products you will find the JR is unmatched in its performance, quality, and durability. With 31″ of 1/2 round stainless steel, a storage feature that allows it to fit in the front compartment of your jet ski or PWC I think you will agree that you will not find a better anchoring choice for your watercraft. With a lifetime warranty and money back guarantee how can you go wrong!
New Boat, Jet Ski, and PWC sand auger anchors
Coming soon are our “lite” series of sand auger anchors for boats, jet skis, and PWC’s. This is a new and economical design made completely of stainless steel. These will still be one of the best and most effective anchoring solutions on the market. They will be offered in 4 different sizes ranging from 18″-48″ for easy shallow water anchoring. If you are in a couple feet of water, setting these anchors will be a breeze!
Better yet, the prices start out at $39!
We should have them available on the website around the first of April.
Thank You!
SandShark Products
SandShark JR
SandShark JR Anchor
The SandShark JR Anchor solves your sand bar, beach, or shallow water docking problems for your Boat, Jet Ski, PWC, or Dinghy.
-
Designed to store in most Jet Ski and PWC compartments.
-
Use as primary or secondary anchor for boats.
-
Use as a sand or beach spike.
How it works:
Here are step by step instructions on using the JR-the Ultimate Jet Ski and PWC Sand Anchor. The JR will store at 18″ in the front compartment of your watercraft and extend to 31″ to set the auger deep for safe, strong and effective holding power.
Easy to use and easy to store; the JR is the most effective sand and shallow water anchor for jet skis, PWC’s and waverunners.
 The JR in storage mode |
 Remove the Pins |
 Remove the auger and extension from the handle, |
 Insert extension and pin onto auger shaft. |
 Insert handle and pin onto extension. |
 Done! |
Reverse instructions to put the JR back in storage mode.
Relax and enjoy your time on the water without having to worry about your watercraft getting beached or drifting away with the tide! No need to beach it! Just dock it safely in shallow water close to the shore!
SandShark JR Features:
- Stores to 18″ inches. Fits in Most PWC’s and Jet Ski’s
- 31″ inches from Top to Bottom
- Constructed Completely out of Stainless Steel
- Lifetime Warranty, Top Quality and Built to Last
- 1/2″ inch Solid Stainless Steel Auger Shaft w/3” Blade
- Foam Grips for Comfortable Turning
- Quick Release Pin for Easy Use and Storage
- High Corrosion Resistance
- Proudly Made in the USA!
*NOTE FOR SALTWATER USAGE
Saltwater is one of the toughest environments for metals and if the salt remains on the anchors in storage it will continue to promote corrosion. Stainless steel has a high tolerance for corrosion but if left in saltwater long enough it too is susceptible. For best results and corrosion resistance please rinse the saltwater off the anchors when putting into storage or after use. If you have signs of corrosion use a wire brush or sandpaper to remove.
