Posts Tagged ‘jet-ski’

Protect Your Jet Ski or PWC with Salt-Away

Protect Your Jet Ski or PWC with Salt-Away!

Extremely effective at flushing salt out of the cooling water jacket of inboards, I/Os and personal watercrafts. A special salt-removal concentrate prevents salt build up inside the engine before corrosion can begin, and provides long-lasting protection.
    •    Mixer unit (sold separately) connects with garden hose on one end, and motor flusher on the other end
    •    Concentrate is dispensed with fresh water at the appropriate ratio
    •    32 oz. concentrate yields eight applications for motor flush and 24' boat washdown
    •    Excellent for accessing radar tower, flying bridges, outriggers, masts, and other hard-to-reach areas

Related Images:

Use Salt-Away Prevent Corrosion and Damage from Salt Water

Salt-Away is a Motor Flush for inboard, outboard, I/O and personal watercraft motors and an exterior salt removing treatment. Salt-Away is water based, non-hazardous, biodegradable, and contains properties that attack and remove salt from any surface. Repeated use with Salt-Away will break down and remove old salt and rust deposits. Safe for use on any metal, aluminum, fiberglass, paint, rubber, plastic, chrome, glass, or any surface exposed to salt. Salt-Away will not strip away waxes, but will wash away salt and leave a protective film on the surface to protect against rusting.

Related Images:

Use a Boat or Jet Ski Sand Auger Anchor in the Water for Best Results.

We have found that when using a sand auger anchor for your boat or jet ski, it works better in the water than on the shore or beach.  The reason for this is because the moving water keeps the hole around the auger filled in.  For example, try to dig a hole a few feet into the water along a beach or shoreline.  It is impossible because the moving water keeps washing sand constantly into the hole.

When the augers are on the dry beach or shore, the hole created from placing the auger in is loose and not packed around the shaft.   When they are in the water, the water keeps the sand packed around the shaft and creates a "suction" on the auger and the shaft which is almost impossible to "pull-out".  When placed correctly an auger anchor will not be "pulled out" it will have to be "turned out".  This also keeps your watercraft away from the shore to prevent damage.  So better holding power and less damage!

The next time you parked your boat, jet ski, or pwc at the sandy beach put your auger anchor in the shallow water rather that the dry beach.  Enjoy!

Related Images:

Lite Series

SandShark Lite Series Anchors

The new "Lite Series" of anchors provide strength and quality at an affordable price!  Offered in a variety of sizes to meet all of your anchoring needs. All 5/8" SandShark Lite Series anchors are recommended for all boats and watercraft less than 30' depending on conditions.  Different lengths are offered to accommodate anchoring in deeper water. These anchors are 100% stainless steel, with a lifetime warranty, and a 30-day money back guarantee! Insert our universal handle for all Lite Series Anchors and easily turn the anchor into the beach, shoreline, or shallow water water. No more worrying about your watercraft getting damaged, smashed, or being "taken out" with the tide.  Works in almost all sandy, soft, or rocky conditions.  Use with your Boat, Jet Ski, PWC, Pontoon, Tritoon, or any type of watercraft!

How to Use the SandShark Lite 36 Boat Sand & Shallow Water!

  Lite Series Anchors:Recommended Uses: * Boat, Pontoon, Tritoon * Jet Ski, PWC, Waverunner * Dinghy's, Power-House Boat * Short/Long Term Dock Post * Ground Stake, Kite Anchor * Beach, Sand, Shore Spike * Water Trampoline Stake

Click Here To Get Yours Today!

Related Images:

New Boat, Jet Ski, and PWC sand auger anchors

Coming soon are our "lite" series of sand auger anchors for boats, jet skis, and PWC's.  This is a new and economical design made completely of stainless steel.  These will still be one of the best and most effective anchoring solutions on the market.  They will be offered in 4 different sizes ranging from 18"-48" for easy shallow water anchoring.  If you are in a couple feet of water, setting these anchors will be a breeze!

Better yet, the prices start out at $39!

We should have them available on the website around the first of April.

Thank You!

SandShark Products

Related Images:

SandShark JR

SandShark Jr jet ski anchor

SandShark JR Anchor

The SandShark JR Anchor solves your sand bar, beach, or shallow water docking problems for your Boat, Jet Ski, PWC, or Dinghy.
  • Designed to store in most Jet Ski and PWC compartments.
  • Use as primary or secondary anchor for boats.
  • Use as a sand or beach spike.

  *Please note the video represent an earlier version of the SandShark Jr. and is for instructional purposes only.  Please refer to the pictures on the shopping site for the most recent version of the SandShark JR.  The new version is 3 pieces but does not store into the handle.  Thank You! How it works: The JR will store at 18" in the front compartment of your watercraft and extend to 31" to set the auger deep for safe, strong and effective holding power. Easy to use and easy to store; the JR is the most effective sand and shallow water anchor for jet skis, PWC's and waverunners.  
Relax and enjoy your time on the water without having to worry about your watercraft getting beached or drifting away with the tide!  No need to beach it! Just dock it safely in shallow water close to the shore!

SandShark JR Features:

  • Stores to 18″ inches. Fits in Most PWC’s and Jet Ski’s
  • 31″ inches from Top to Bottom
  • Constructed Completely out of Stainless Steel
  • Lifetime Warranty, Top Quality and Built to Last
  • 1/2″ inch Solid Stainless Steel Auger Shaft w/3” Blade
  • Foam Grips for Comfortable Turning
  • Quick Release Pin for Easy Use and Storage
  • High Corrosion Resistance
  *NOTE FOR SALTWATER USAGE Saltwater is one of the toughest environments for metals and if the salt remains on the anchors in storage it will continue to promote corrosion.  Stainless steel has a high tolerance for corrosion but if left in saltwater long enough it too is susceptible.  For best results and corrosion resistance please rinse the saltwater off the anchors when putting into storage or after use.  If you have signs of corrosion use a wire brush or sandpaper to remove.  

JR Prices and Order Online!

Related Images:

SandShark Anchors: Simply the Best on The Market

SandShark anchor shallow water anchor
The SandShark HD

More Info

Order

The Ultimate SandShark!

More Info

Order

JR for Jet Ski's and PWC's

More Info

Order      

How are our products different from others?

Our products are different from others because they act like portable docking posts rather than boating anchors.  This way you can obtain the the type of holding power you need to keep the watercraft in place at shore or shallow water locations.  At SandShark Products we designed products that are;
  • BiggerSandShark anchor boat sand anchor
  • Stronger
  • More Effective
To solve the common problem of keeping boats, pontoons, tritoons, jet ski's, and PWC's firmly in place...
  • You need more width and length to get "Superior Holding Power"
  • The SandShark Extends to 5'3" for maximum flexibility
  • The JR for Jet Ski's and PWC's Extends to 31"
  • All products are designed for "Deep Penetration and Convenient Storage"
       
 

A Different Approach to the Anchoring Concept

Why It Works

    • One of a Kind || The reason the SandShark Anchor is so SandShark boat sand screweffective at anchoring in sandbar and beach locations is because we  use a different anchoring concept. Traditional anchors are not effective for anchoring in tight shorelines, shallow water, or beach locations. If you've ever tried, then you probably know your boat is  either going to get beached or start drifting. The SandShark allows you to auger down into a solid footing using it's stainless steel handle cranks and 5' foot extension shaft with 4" inch auger blades. Docking on the shoreline, shallow water, and in footing like gravel, muck, clay, shore, or sand is made easy with the SandShark!
 
    • Better Holding Power || Traditional anchors try to pin anchor lines to the bottom of the lake, however, when waves or currents push up against the bottom of the boat, the anchors are easily removed from the sand. Traditional anchors also do not have very much “holding power” because they are not able to reach into the firmer ground below the sand. Traditional anchors need to be placed 20-40′ away from the boat to increase the angle of the anchor line, and decrease the pressure applied to the anchor. These factors make traditional anchors “ineffective” for sandbar and beach anchoring.
 
    • Solid Anchoring System || The SandShark Anchor fixes these common anchoring problems by being able to reach the firmer ground below the sand, and by extending upward to increase the angle of the anchor line. Hence, your boat or pontoon is held in firm ground and you have an anchor line almost straight out from your boat.  This makes anchoring your boat more like tying to a pier or a dock.
 
    • Above Water Tie-Down || A good illustration of “how and why traditional anchors fail” is to stand next to a boat and hold the anchor line at water level. As you can see, the boat is easily held in place with your hands and very little effort. When the waves come in, the boat simply goes up and down, without a lot of force.  This is exactly how the SandShark works, holding your line above the water to securing your boat.  Now try to hold the anchor line at the bottom of the lake or ocean; like a traditional anchor would. Here you will notice the anchor line is “ripped” from your grasp easily. Thousands of pounds of "force" is created when the waves are lifting your boat up-and-down. This creates an almost impossible situation for traditional anchors to overcome.
 

When we say SandShark Anchor is the best auger anchor on the market… we mean it.

Duane Mattix Inventor/Founder/CEO SandShark Products, Inc.
    • Efficient Function and Design ||There are essentially two forces holding the SandShark Anchor in place. One is from the 4″ blade that is driven into the ground or solid base to prevent the Sand Shark Anchor from being pulled upward. The other force keeping the SandShark in place is from the 1-2’deep hole created by augering the SandShark in place. Because of the depth of the hole, the SandShark Anchor is stable and not likely to be “pulled-over”, or “collapsed to the side”. These two forces keep your boat from washing into shore and can be used in the front and/or the rear of the boat.
View Features and Specs   Note from Duane: We started in 2009 to produce the best beach and sandbar anchor available. We are continuing to develop new products to meet the needs of our customers. Thank you and feel free to comment on the product and the concept, and we would love to hear from you regarding your boating experiences!

Related Images:

New Anchors for 2017: XL, Large & PWC > Learn more…

Shop SandShark Anchors & Products 24/7 :: Buy Online, Fast Shipping!

Visit the Sand Shark Anchor Products: Shopping Site