Posts Tagged ‘BEST’

Best PWC, Waverunner, Jet Ski, Anchor that Actually “Holds” in the Sand or on the Beach

If you are looking for the best Jet Ski Anchor, the SandShark JR is at the top of your list!  Customers from all over the world find that the SandShark JR lives up to it claim as the Best Solution for Anchoring your Jet Ski or PWC.  Newly designed, the JR has added an anodized top, ring to tie-off, and available in blue or black.  With an optional padded case, convenient storage, and great performance of the JR it is the Best Jet Ski Anchor Available!
SandShark JR

SandShark JR

Related Images:

Best Jet Ski and PWC Anchor the SandShark JR.

Another great testimony about the SandShark JR:   "I just wanted to share my story and thank you for making such a wonderful quality product. I just recently purchased a new Yamaha WaveRunner and took it with me this past weekend to Traverse City, MI on vacation with my family. I had it anchored about 25 feet offshore on Lake Michigan with 2 SandShark Juniors, one in the front and one in the rear. On Sunday a massive storm tore through the region, with sustained winds of 70 mph and gusts of up to 90 mph. The winds lasted a solid 30 minutes, and all I could do was watch in horror as my WaveRunner was battered with massive waves. Several neighboring boats and docks were destroyed. The SandSharks held for nearly 25 minutes before they became dislodged. Luckily, the storm had settled enough to where I could run down and beach my WaveRunner before any serious damage was done. Had the SandSharks not held for as long as they did, my WaveRunner might not have been so lucky!" Buy the Best Forget the Rest!
SandShark JR

SandShark JR Anchor

Related Images:

SandShark JR, The Best Jet Ski Anchor!

If you are looking for the best Jet Ski Anchor, the SandShark JR is at the top of your list!  Customers from all over the world find that the SandShark JR lives up to it claim as the Best Solution for Anchoring your Jet Ski or PWC.  Newly designed in 2013, the JR has added an anodized top, ring to tie-off, and available in blue or black.  With an optional padded case, convenient storage, and great performance of the JR it is the Best Jet Ski Anchor Available!

 

SandShark JR

SandShark JR

Related Images:

Best Jet Ski Anchor

Looking for a Jet Ski Anchor?  A sand anchor is ideal for anchoring PWCs or Jet Skis in shallow water to keep the impeller off the beach.  The SandShark Jr is the best way to anchor your jet ski or PWC at the beach, sand, or in shallow water.  Don’t let this season go by without getting the best anchoring system for your watercraft!  The SandShark Jr is the best solution for a Jet Ski Anchor for the beach, sand, or in shallow water!

 

SandShark Jr jet ski anchor

Related Images:

Best Jet Ski Anchor

Looking for a Jet Ski Anchor?  A sand anchor is ideal for anchoring PWCs or Jet Skis in shallow water to keep the impeller off the beach.  The SandShark Jr is the best way to anchor your jet ski or PWC at the beach, sand, or in shallow water.  Don’t let this season go by without getting the best anchoring system for your watercraft!  The SandShark Jr is the best solution for a Jet Ski Anchor for the beach, sand, or in shallow water!

 

Sandshark JR with Case

Related Images:

SandShark JR, The Best Jet Ski Anchor!

If you are looking for the best Jet Ski Anchor, the SandShark JR is at the top of your list!  Customers from all over the world find that the SandShark JR lives up to it claim as the Best Solution for Anchoring your Jet Ski or PWC.  Newly designed in 2013, the JR has added an anodized top, ring to tie-off, and available in blue or black.  With an optional padded case, convenient storage, and great performance of the JR it is the Best Jet Ski Anchor Available!

 

Sandshark JR with Case

Related Images:

How to use your SandShark Anchor

To position the SandShark:

  1. Remove from case and extend to desired length.
  2. Hand- tighten the center knob clockwise.*
  3. Rotate handles 180 degrees.  Extend the handles so that you can apply downward pressure without the  handles folding down.
  4. Pick a spot 2-5' away from boat.  Auger clockwise into the ground until a firm base is established.  This may take several revolutions.  Auger to a depth where a firm base is established (Approximately 1-3').
  5. After auger obtains a firm base, extend or lower the anchor using the center knob and re-tighten.  The optimum position is to have the handles at or above water level,  if this is not possible fully extend to maximum length.*
  6. Secure to boat and enjoy your time worry-free!  The SandShark will keep the waves from beaching your boat!


To remove the SandShark:


  1. Release the anchor from the boat.
  2. Fold the handles upwards, rotate handles 180 degrees, then fold upwards so you can apply upward pressure to the SandShark.
  3. Turn the handles counter-clockwise while applying upward pressure. This may take several revolutions.
  4. After the auger is released from the bottom, rinse away any excess sand and grit.
  5. Rotate handles 180 degrees, then fold down
  6. Loosen center knob, collapse the anchor, and re-tighten the center knob*
  7. Place in desired storage location.


*please note -- Always re-tighten the center knob.

*please noteThe SandShark will work even if completely submerged in the water.



FOR BEST RESULTS:

Attach one SandShark to the front of the boat and one SandShark at the rear of the to prevent side-to-side swaying.

Related Images:

New Anchors for 2017: XL, Large & PWC > Learn more…

Shop SandShark Anchors & Products 24/7 :: Buy Online, Fast Shipping!

Visit the Sand Shark Anchor Products: Shopping Site